Chemistry/Pharmaceutical/Food
| Year | Project | Customer | Services | Description |
| 1998 | Pneumatic conveying | Kohleölanlage Bottrop |
|
Optimizing of the silo truck unloading plant (unloading of recycling plastics fractions, decrease of unloading time) concerning way of conveying lines and nitrogene circle system (nitrogene as conveying gas), depolymerisation plant Bottrop (Germany) |
| 1998 | Dioin minimisation | CIBA-Spezialitätenchemie, Grenzach-Wyhlen |
|
development and construction of a high pressure ejector (functioning as nozzle) for conveying and dispersion of gas-solids-mixtures into reaction chambers, test commissioning at a flue gas duct (adsorption of dioxines and furanes with activated coal) |
| 1999 | Environmental engineering | Plant Giken, Tokyo |
|
market investigation of the power station sector |
| 1999/ 2000 |
Projectmanagement | Seika-Sangyo, Tokyo/Düssseldorf |
|
Consulting for SAP-production plant (material handling), at Nippon-Shokubai in Antwerpen (Belgium) |
| 2001 | Ejectors | Acrison International GmbH/Ltd. (UK), Bad Laasphe/Manchester |
|
Layout and supply of three DN30 injectors, redesigned as ventury injectors to convey SAP. |
| 2002 | Solids handling and dosing | Kronos Titan, Leverkusen |
|
Engineering and measurements for a truck loading application with titanium oxide (TiO2). |
| 2002 | Vacuum conveying | Schering AG, Berlin |
|
Inspection of the pneumatic vacuum conveying of medical waste materials. |
| 2003 | Pneumatic conveying | Evonik Degussa GmbH, Hanau-Wolfgang |
|
Construction and supply of several high pressure ejectors: DN 40 in Stainless steel, DN 15 with a teflon diffuser. |
| 2003 | Pneumatic conveying | crenox GmbH, Krefeld |
|
Supply of several DN 50 and DN 80 ejectors made of stainless steel, for the conveying of tatanium dioxide |
| 2003 | Pneumatic conveying | Evonik Degussa GmbH, Werk Rheinfelden |
|
Layout of a conveying line and supply of a DN 200 ejector for conveying silica acid |
| 2003 | Pneumatic conveying | Cerestar Deutschland GmbH, Krefeld |
|
Inspections and advice for the manufacture of a low friction operation and delivery, as well as a reduced maintenance requirement for conveyance of Dextrose-Monohydrate to a silo |
| 2004 | Pneumatic conveying | Evonik Degussa GmbH, Werk Rheinfelden |
|
Delivery of a 2-way-distributor (from DN 80 to 2xDN40), with DN40 flange connections to be used in experimental research. |
| 2005 | Pneumatic conveying | Norddeutsche Affinerie AG, Hamburg |
|
Technical Process calculation and inspection of the dimensioning of the system for pneumatic conveying of concerntrated copper |
| 2005 | Pneumatic conveying | crenox GmbH, Krefeld |
|
Technical engineering consultation during the construction of a pigment conveying system |
| 2006 | Pneumatic conveying | Süd-Chemie AG, Duisburg |
|
Engineering for the conveying of additional material |
| 2007 | Solids handling and dosing | Compass Bulk Handling System Pte Ltd., Singapore |
|
Supply of 6 ejectors DN 50 |
| 2009 | Pneumatic conveying | Dinnissen BV, 5975 NB Sevenum, the Netherlands |
|
Delivery of ejector DN 100 |
| 2011 | Solids handling and dosing | Compass Bulk Handling System Pte Ltd., Singapore |
|
Supply of ejectors DN 80+100 |
| 2011 | Pneumatic Conveying | Nestec Ltd, Schweiz |
|
Technical Consultancy |
| 2011 | Environmental engineering | Aralon GmbH, Heiligenroth |
|
Engineering/ Approval- and implementation planning |
| 2012 | Pneumatic conveying | Fresenius Medical Care Deutschland GmbH, St. Wendel |
|
Delivery of ejector DN65 |
| 2012 | Solids handling and dosing | Albemarle (BE); Martinswerk GmbH, Bergheim |
|
Conceptual design for different loading stations for aluminium oxide |
| 2013 | Truck-Unloader | MITECA AG, Zofingen, Schweiz |
|
Design: Pneumatic transport of sugar products |
| 2013 | Pneumatic conveying of coal | Sachtleben Pigment GmbH, Krefeld |
|
Delivery of ejector DN100 made of stainless steel |
| 2013 | Pneumatic conveying | Wacker Chemie AG |
|
Engineering of pneumatic conveying of caolin |
| 2014 | Pneumatic conveying | Styrolution Köln GmbH |
|
Design of conveying line for fine-grained bulk materials |
| 2014 | Pneumatic conveying | Wacker Chemie AG, Burghausen |
|
Delivery ejector DN150 |
| 2014 | Pneumatic conveying | Wacker Chemie AG, Burghausen |
|
Delivery of 2 ejectors DN 80, incl.spareparts (nozzles) |
| 2014 | Pneumatic conveying | SternMaid GmbH, Wittenburg |
|
Design for ejectors |
| 2014 | Pneumatic conveying | Styrolution Köln GmbH |
|
Design for granulate-conveying |
| 2014 | Pneumatic conveying | COMPO EXPERT GmbH, Krefeld |
|
Troubleshooting pneumatic conveying pipe |
| 2014 | Pneumatic conveying | Styrolution Köln GmbH |
|
Design of conveying line for fine-grained bulk materials |
| 2015 | Pneumatic conveying | Evonik Industries, Bonn-Beuel | Pneumatic conveying of matting agents and delivery of one ejector DN50 | |
| 2015 | Pneumatic conveying | Wacker Chemie AG, Burghausen |
|
Delivery of an ejector DN80, spare nozzle and pressure regulator |
| 2015 | Pneumatic conveying | BASF SE, Ludwigshafen |
|
Performance of tests for conveying of catalyst powder |
| 2015 | Silo filling | Battermann & Tillery GmbH, Nürnberg |
|
Recalculation of a silo-claim |
| 2015 | Pneumatic conveying | 3M Technical Ceramics, Kempten |
|
Delivery of an ejector DN40T made of stainless steel |
| 2015 | Silo filling | Crespel & Deiters GmbH & Co. KG, Ibbenbüren |
|
Basic-Engineering: design of silo battery incl. Filling by trucks and air supply station |
| 2015 | Pneumatic conveying | Wacker Chemie AG, Burghausen |
|
Delivery of an ejector DN100 |
| 2015 | Pneumatic conveying | M+W Central Europe GmbH, Ludwigshafen |
|
Basic-Engineering Silo-Filling |
| 2016 | Pneumatic conveying | Evonik Industries AG, Marl |
|
Supply of ejectors DN200, DN100 |
| 2016 | Pneumatic conveying | BASF SE, Ludwigshafen |
|
Supply of special nozzles for internal coating of chemical products |
| 2016 | Pneumatic conveying | Noerr LL, RA V. Bock, Dresden |
|
Experts report for microwave-system in pneumatic conveying lines |
| 2016 | Ejectors | Sapplicator GmbH/Ltd. (UK), Bad Laasphe/Manchester |
|
Delivery of an ejector DN15T |
| 2016 | Pneumatic conveying | TOTAL PETROCHEMICALS FELUY SA. B-Feluy |
|
Delivery of an ejector DN80 (made from stainless steel) |
| 2017 | Pneumatic conveying | Hosokawa GmbH, Augsburg |
|
Delivery of an ejector DN200 (made from stainless steel) |
| 2017 | Pneumatic conveying | Styrolution Köln GmbH |
|
Lieferung Edelstahlinjektor DN200
Design of conveying line |
| 2017 | Pneumatic conveying |
Vinnolit GmbH & Co. KG, Werk Köln |
|
Delivery of an ejector DN150 (stainless steel) |
2017 |
Pneumatic conveying | INEOS/Styrololution, Köln |
|
Engineering of the transport of moist goods II: Optimisation of a conveyer line for moist granulate plastic |
| 2017 | Pneumatic conveying | INEOS/Styrololution, Köln |
|
Engineering (fluidisation test bench) / bubble column test |
| 2018 | Pneumatic conveying | Shanghai Danmy Mechanical & Electrical, Equipment Co. Ltd., Shanghai, P.R. China |
|
Delivery of an ejector DN65 |
| 2018 | Pneumatic conveying | Wacker Chemicals Nanjing, P.R. China |
|
Delivery of an ejector DN80 |